roof panel forming machine, wall panel roll forming machine
1.roof forming machine
specification:
- raw material scalemm:1000mm~1250mm×0.25~0.7mm×L
- rolling depression speed: 17~20M/min
- roller number:18~26 couple according to specific panel shape
- roller material:adopt high quality 45#steel with chromizing on surface
- main axletree material:adopt high grade 45#steel finish machining
- power of the main pump:4KW
- pressure of hydraulic station: 10~12 Mpa .
- electrical control system: Using PLC Control the quantity, length automatically, touch screen
- equipment shape size:approximately 10000mm×1600mm×1200mm
- equipment total weight:approximately 7~10 Tonsaccording to specific panel shape .
2.roof panel forming Machine
Components:
- Manual Un-coiler————————————–1 set
- Roll-Forming M/C————————————1 set
- Hydraulic Cutting————————————1 set
- PLC Control System———————————–1 set
- Product Rack un-powered————————1 set
3.Technical Specification:
- Manual Un-coiler: Un-powered; Load capacity = Max.5Tons;
- Roll-Forming machine:
- Hydraulic Cutting:
- PLC Control System:
- Product Rack UN powered
About 18steps to form; Material of Roller: 45# steel with chromizing on surface
Voltage:380V/50Hz; Main line speed:8~12 m/min;
Stop to cut————>Post cut,
Cutting tool material: Cr12, Heat treatment
Using PLC Control the quantity, length automatically, LCD screen,
4.Hydraulic Un-coiler:
- Hydraulic system to expand coil inner hole;
- Frequency Inverter to regulate turning speed,
- Automatic stop device;Load capacity = Max.5Tons;
5.Material:
- 1 Coil Width: 1000mm~1250mm
- 2 Suitable Coil Thickness: 0.25~0.7mm
roof forming machine,roof panel forming machine,wall panel forming machine,roll forming machine,forming machine,roll forming machinery
Alternative Name:
- roof and wall panel roll forming machine
- roof wall panel machine
- roof panel or wall panel roll forming machine
- Double Layer Roof Wall Panel Roll Forming Machine
